SITC of AHUs with DX Units HVAC Electrical Civil Works in OTs 1 2 3 of Dept of Plastic Reconstructive Surgery at NIMS Hospital Hyderabad
Ai Generated Article,
Bill of Quantity Items Print Preview
Current Tender Details
Tender ID
613349
Enquiry/IFB/Tender Notice Number
14/27/EE/2025-26
Name of Work
SITC of AHUs with DX Units HVAC Electrical Civil Works in OTs 1 2 3 of Dept of Plastic Reconstructive Surgery at NIMS Hospital Hyderabad
Tender Category
Works
Tender Type
OPEN – NCB
Estimated Contract Value
5879983
Bid Submission Closing Date
04/08/2025 04:00 PM
Tender Evaluation Type
Percentage
Back Print
BOQ Item Details
S.No
Subwork Name
Specification Number
Quantity
UOM
Rate(INR)
Amount(INR)
1
BOQ
Wall and Celing Accostic Insulation for AHU Room
1050.00
Sft
158.00
165900.00
Wall and Celing Accostic Insulation for AHU Room for Sound Proofing. 20ft length x 12ft width x 12ft height
Subwork Name
Specification Number
Quantity
UOM
Rate(INR)
Amount(INR)
2
BOQ
Providing and constructing AHU enclosure (7?m ×?4?m) including PCC base with Shabad stone flooring
1.00
Lot
113702.00
113702.00
Providing and constructing AHU enclosure (7?m ×?4?m) including PCC base with Shabad stone flooring, 230 mm thick front brick wall with plastering, and pre-coated GI sheet roofing over MS structural framework, complete with all materials, labour, fabrication, painting, anchoring, and finishing as per site conditions and Engineer-in-Charge instructions.Detailed work to execute is in tender document
Subwork Name
Specification Number
Quantity
UOM
Rate(INR)
Amount(INR)
3
BOQ
(SITC) of MS structural platform using 100×50×5 mm ISMC channels
6000.00
kgs
102.00
612000.00
?Supply, Installation, Testing, and Commissioning (SITC) of MS structural platform using 100×50×5 mm ISMC channels conforming to IS:2062 grade, complete with cutting, welding, bolting, anchoring, strengthening, base plates, and supports, including necessary civil foundation works with PCC pedestals and cementitious grouting, fixing of wall clamping arrangements with chemical/anchor bolts, application of one coat red oxide primer and two coats of synthetic enamel paint, waterproofing treatment at column base and wall interfaces, erection at site above 5.0 meters height
Subwork Name Specification Number Quantity UOM Rate(INR) Amount(INR)
using scaffolding/lifting equipment, and complete in all respects as per drawings and specifications, including all labour, tools, safety PPEs, testing, T&P, and supervision, but excluding contractor?s
overheads and profit.?for AHU 1,2,3
Subwork Name
Specification Number
Quantity
UOM
Rate(INR)
Amount(INR)
4
BOQ
waterproof PVC laminated ceiling tiles of size 600×600 mm
2500.00
sft
135.00
337500.00
Supply and installation of factory-manufactured branded waterproof PVC laminated ceiling tiles of size 600×600 mm, 6?8 mm thick, conforming to cleanroom and healthcare-grade standards, laid on exposed GI T-grid system (24 mm), including GI main runners, cross tees, perimeter channels, suspension system with GI wire hangers, adjustable clips, anchors, rawl plugs, and necessary accessories; installation to be carried out in true level using laser alignment, with all cutting, finishing, cleaning, and disposal of debris; tiles shall be anti-fungal, anti-bacterial, fire-retardant, washable, and VOC-free, suitable for Operation Theatre area above the operation table, complying with infection control and hospital hygiene standards, complete as per manufacturer’s specifications and as directed by Engineer-in-Charge.at lobby near Table 1,2 & 3 area.
Subwork Name
Specification Number
Quantity
UOM
Rate(INR)
Amount(INR)
5
BOQ
Dismantling of existing false ceiling
2500.00
sft
14.75
36875.00
Dismantling of existing false ceiling including careful removal of old ceiling tiles, GI grid system, hangers, and supports; clearing and disposal of debris from site as per instructions of Engineer-in- Charge, ensuring no damage to existing civil finishes, and complete site clearance with all labour, tools, and safety precautions.
Subwork Name
Specification Number
Quantity
UOM
Rate(INR)
Amount(INR)
6
BOQ
Dismantling of existing AHU
3.00
No
27540.00
82620.00
Dismantling of existing AHU units, electrical panels, copper refrigerant piping (with insulation), and outdoor units (ODUs), including disconnection, gas evacuation (if required), removal of supports using gas cutters/welding wherever necessary, safe handling, site clearance, and buy-back of all dismantled material/scrap by the contractor, with all dismantled items to be taken out through proper gate pass after due certification by the Engineer-in-Charge and Administration, including all labour, tools, equipment, transportation, and compliance with site safety protocols.
Subwork Name
Specification Number
Quantity
UOM
Rate(INR)
Amount(INR)
7
BOQ
drain pipe with CPVC pipes
35.00
Rmt
555.00
19425.00
Supply, installation, testing and commissioning of the drain pipe with CPVC pipes with all accessories and insulation with 6mm thick closed cell nitrile rubber of the following sizes,with all required accessoriesMakes : Astral / Ashirvad or equivalent approved by the department
Subwork Name
Specification Number
Quantity
UOM
Rate(INR)
Amount(INR)
8
BOQ
4 Sqmm 2 Core XLPE
100.00
Rmt
160.00
16000.00
Subwork Name Specification Number Quantity UOM Rate(INR) Amount(INR)
Supply of 4 Sqmm 2 Core XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part- I)
Subwork Name
Specification Number
Quantity
UOM
Rate(INR)
Amount(INR)
9
BOQ
6 Sqmm 4 Core XLPE
100.00
Rmt
230.00
23000.00
Supply of 6 Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part – I) Makes : Torrent / Unicab
Subwork Name
Specification Number
Quantity
UOM
Rate(INR)
Amount(INR)
10
BOQ
control panel
3.00
No
20500.00
61500.00
Supply and Transportation of control panel for three phase submersible motors above 7.5 HP to 12.5 HP @ 415V 50Hz operating fitted with supply and fixing of Direct – on – Line LTLK(L&T) /BCH/ SIEMENS / CROMPTON make,0-500V Volt meter and 0-30A Ammeter,Indication lamps, selector switches, CTS, 32ATP MCB, Single phase preventor,suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCBetc.,complete.1 No 20500.00
Subwork Name
Specification Number
Quantity
UOM
Rate(INR)
Amount(INR)
11
BOQ
non porous doble layer canvas
6.00
No
1895.00
11370.00
Supply and fixing of fire retardant, non porous doble layer canvas of required size with GI frame, Gasket Nut bolts for air cooling plants /AHU’s / FCU’s etc., complete with marking connections etc., as required all as per approved by Engineer-In-Charge.1 No 1895.00
Subwork Name
Specification Number
Quantity
UOM
Rate(INR)
Amount(INR)
12
BOQ
Return Air Temperature & RH Sensor
3.00
No
17000.00
51000.00
Return Air Temperature & RH Sensor: Supply, Installation, Testing & Commissioning of Duct type Return Air Temperature & RH sensor with all the mounting accessories included. The sensor shall be Pt1000 RTD type for temperature measurement with 0 to 10V / 4-20mA transmitters. The temperature measurement range shall be 10oC to 50oC and RH measurement range 0-90%RH, accuracy ±2 %RH with all other mounting accessories complete as required.
Subwork Name
Specification Number
Quantity
UOM
Rate(INR)
Amount(INR)
13
BOQ
25 mm thickness closed cell nitrile rubber
200.00
Sqmm
1725.00
345000.00
Supply and fixing of 25 mm thickness closed cell nitrile rubber (Class O) insulation on existing duct after applying 2 coats of cold setting adhesive (CPRX Compound). The joints shall be sealed with 50mm wide and 3mm thick self adhesive nitrile rubber tape insulation complete as per specifications.Thermal conductivity should not exceed 0.037W/mk
Subwork Name
Specification Number
Quantity
UOM
Rate(INR)
Amount(INR)
14
BOQ
Acoustic insullation 10 mm
30.00
Sqmm
95.00
2850.00
Subwork Name Specification Number Quantity UOM Rate(INR) Amount(INR)
Supply, installtion, testing and commissioning of Acoustic insullation 10 mm thick open cell nitrile rubber 1 Sqft 95.00
Subwork Name
Specification Number
Quantity
UOM
Rate(INR)
Amount(INR)
15
BOQ
DUCTING & INSULATION WORKS
2000.00
Sqft
120.00
240000.00
DUCTING & INSULATION WORKS :Supply, Installation, Testing & Commissioning & Handing over of the following: Rectangular Aluminium ducting ? Factory Fabricated complete with splitter dampers, turning vanes, access doors, supports, air tight joints with dual insulation to avoid leakage, applied with sealant etc. as per drawings. The duct supporting shall be as per SMACNA standards.24 G
Subwork Name
Specification Number
Quantity
UOM
Rate(INR)
Amount(INR)
16
BOQ
DUCTING & INSULATION WORKS
2600.00
Sqft
145.00
377000.00
DUCTING & INSULATION WORKS :Supply, Installation, Testing & Commissioning & Handing over of the following: Rectangular Aluminium ducting ? Factory Fabricated complete with splitter dampers, turning vanes, access doors, supports, air tight joints with dual insulation to avoid leakage, applied with sealant etc. as per drawings. The duct supporting shall be as per SMACNA standards.22 G
Subwork Name
Specification Number
Quantity
UOM
Rate(INR)
Amount(INR)
17
BOQ
Laminar Flow Tent
1.00
No
255000.00
255000.00
Design, Fabrication, Supply, Installation, Testing & Commissioning of Laminar Flow Tent of size 8 ft x 6 ft, fabricated from SS 304 grade sheet, fitted with 6 Nos. HEPA filters (each approx. 2 ft x 2 ft), minimum 99.97% efficiency @ 0.3 micron, conforming to EN 1822 / ISO Class 5, with a stainless steel perforated bottom grill, and suspended above the table using SS supports and hangers.
Subwork Name
Specification Number
Quantity
UOM
Rate(INR)
Amount(INR)
18
BOQ
Vertical risers
6.00
No
12756.00
76536.00
Vertical risers with return & supply grills for AHU 1,2 & 3
Subwork Name
Specification Number
Quantity
UOM
Rate(INR)
Amount(INR)
19
BOQ
Expansion valve
6.00
No
19795.00
118770.00
SITC of Expansion valve along with necessary fixing arrangement & Filter dryer for sutable size for liquid line & capacity. AHU 1,2 & 3
Subwork Name
Specification Number
Quantity
UOM
Rate(INR)
Amount(INR)
20
BOQ
Refrigerant
65.00
Kg
2095.00
136175.00
SITC of Refrigerant ECO Frendly. (410a / 407 or eqt).
Subwork Name
Specification Number
Quantity
UOM
Rate(INR)
Amount(INR)
21
BOQ
REFRIGERANT PIPES
120.00
Rmt
1840.00
220800.00
Subwork Name Specification Number Quantity UOM Rate(INR) Amount(INR)
REFRIGERANT PIPES: – 18G. Hard drawn Refrigerant piping circuit with 19mm thick nitrile rubber tube insulation with polyshield covering suitable for outdoor installation.Providing 2 runs of Copper tubes for suction and liquid between indoor and outdoor unit for split/Casseete Air-Conditioner including
foaming etc.
Subwork Name
Specification Number
Quantity
UOM
Rate(INR)
Amount(INR)
22
BOQ
DX OUTDOOR UNITS
2.00
No
345850.00
691700.00
DX OUTDOOR UNITS: The DX type outdoor condensing unit, shall comprise adequately sized coils to meet the heat rejection requirements. The ODU shall be supplied with eco-friendly refrigerants like R410 A. The outdoor unit shall house scroll type compressors, thermostats, HP/LP cut-outs, condenser coil, filter drier, strainer, fan, fan motor, oil return kit, in-built electrical panel with necessary starter, relays, controls, etc., and the complete unit shall be suitable for outdoor application. The Outdoor Condensing unit heat rejection capacity shall be suitable for the DX coil installed in the AHU and the compressor load. The units shall be suitable for input power supply of 3 phase, 415 volts, 50 Hz. The DX outdoor unit shall be selected for 41 °C outdoor air entering temperature.MAKE:HITACHI/DAIKIN /Blue Star Nominal capacity compressors, condensing fans, necessary starter panel with control cabling, and other components as specified above suitable for the DX evaporator coil specified above OT’s.Towards supply of A/C Condensing unit, Dx type, Double circuit unit with double compressor copper condenser Capacity: 11 TR
Subwork Name
Specification Number
Quantity
UOM
Rate(INR)
Amount(INR)
23
BOQ
DX OUTDOOR UNITS
1.00
No
458850.00
458850.00
DX OUTDOOR UNITS: The DX type outdoor condensing unit, shall comprise adequately sized coils to meet the heat rejection requirements. The ODU shall be supplied with eco-friendly refrigerants like R410 A. The outdoor unit shall house scroll type compressors, thermostats, HP/LP cut-outs, condenser coil, filter drier, strainer, fan, fan motor, oil return kit, in-built electrical panel with necessary starter, relays, controls, etc., and the complete unit shall be suitable for outdoor application. The Outdoor Condensing unit heat rejection capacity shall be suitable for the DX coil installed in the AHU and the compressor load. The units shall be suitable for input power supply of 3 phase, 415 volts, 50 Hz. The DX outdoor unit shall be selected for 41 °C outdoor air entering temperature.MAKE:HITACHI/DAIKIN /Blue Star Nominal capacity compressors, condensing fans, necessary starter panel with control cabling, and other components as specified above suitable for the DX evaporator coil specified above OT’s.Towards supply of A/C Condensing unit, Dx type, Double circuit unit with double compressor copper condenser Capacity: 17 TR AHU- 1
Subwork Name
Specification Number
Quantity
UOM
Rate(INR)
Amount(INR)
24
BOQ
Double skin vertical floor mounted Thermal break AHU
2.00
No
461967.00
923934.00
Double skin vertical floor mounted Thermal break AHU consisting of supply air damper, etc complete with all accessories for the following capacity – Sections: Pre Filter (10mic-50mm tk), Coil and Fan section Insulation 25mm tk RPUF, Panel’s Inner 0.6 mm GI Plain and Outer Pre-painted 0.6 mm tk. Frame Aluminum extruded with nylon corners with Hollow Profile. with return air Plenum with VCD for return air & fresh air openings. Fan DIDW Revers curved make NICOTRA/KRUGER/EQVT Motor: 3PH-IE-2-, MAKE-CG/ABB/EQVT Cooling coil 1/2″-6 Row DX COIL. Aluminum finned copper tube with
Subwork Name Specification Number Quantity UOM Rate(INR) Amount(INR)
SS Drain pan, Filters 10 mic HDPE media in GI Casing, Fine filters bag type, & HEPA filters. following capacities. Static 150mm.Capacity: 11 TR (2x 5.5 TR)
Subwork Name
Specification Number
Quantity
UOM
Rate(INR)
Amount(INR)
25
BOQ
Double skin vertical floor mounted Thermal break AHU
1.00
No
502476.00
502476.00
Double skin vertical floor mounted Thermal break AHU consisting of supply air damper, etc complete with all accessories for the following capacity – Sections: Pre Filter (10mic-50mm tk), Coil and Fan section Insulation 25mm tk RPUF, Panel’s Inner 0.6 mm GI Plain and Outer Pre-painted 0.6 mm tk. Frame Aluminum extruded with nylon corners with Hollow Profile. with return air Plenum with VCD for return air & fresh air openings. Fan DIDW Revers curved make NICOTRA/KRUGER/EQVT Motor: 3PH-IE-2-, MAKE-CG/ABB/EQVT Cooling coil 1/2″-6 Row DX COIL. Aluminum finned copper tube with SS Drain pan, Filters 10 mic HDPE media in GI Casing, Fine filters bag type, & HEPA filters. following capacities. Static 150mm.Capacity: 16.5 TR AHU- 1 (11+5.5)
